Product Document
To start development,DC6688F05S Datasheet must be studied.
Our Product provides In-System Programming. There is one method available:
1) SL
- User is no need to develop its own tooling for programming the chip, as the necessary toolings are already available. Details refer to:
Phase II: Chip Level Verification
On programming, instructions used in DC6688F05S are 8051-based.
Since DC6688F05S is dedicated for single mode remote control application, there is a library prestored in ROM part for public to use. It is strongly recommended to start your development from application note:
IC Marking: DC6688F05S - 01
Single Mode RCU application using DC6688F05S
If Customer would like to have its own ROM code, it is also welcome. Below link is a starting point to develop the ROM source code.
Design ROM code using DC6688F05S
After developed the source code, contact our Sales on details for ROM mask arrangment.
For those application in non-remote control, the library in ROM cannot be used. It is recommended to start from this application note:
Toggling Ports using DC6688F05S
In addition to the above documents, some technical issues have to take into consideration:
1) In hardware design, the following documents have to review:
Design Guide for the clock circuit with a crystal above 1MHz on DC6688F05S
2) In software design, the following documents have to read:
In order to speed up the learning process, here is a list of example source code available.